VuQube VQ2000 Provozní pokyny stáhnout pdf (Strana 10)

Page 8

DIRECTV Plus (satellites 101, 119)

1. On the VuQube controller, press and release the

ON button. Wait for the status light to flash orange,

and then W

AIT 4 MORE SECONDS.

2. Press and release the ON button 8 times.

The status light starts rapidly flashing green and red.

3. Press and hold the button for 4 seconds.

The status light will turn orange for 1 second,

and then start flashing green or red.

4. Press OFF.

5. Set your receiver for oval dish-2 satellites (do this through the receiver’s

satellite set-up menu screens). Configuration is complete. Go to page 16.

Single Satellite 101

1. On the VuQube controller, press and release the

ON button. Wait for the status light to flash orange,

and then W

AIT 4 MORE SECONDS.

2. Press and release the ON button 16 times.

The status light starts rapidly flashing green and red.

3. Press and hold the button for 4 seconds.

The status light will turn orange for 1 second,

and then start flashing green or red.

4. Press OFF.

5. Set your receiver for round dish-1 satellite (do this through the receiver’s

satellite set-up menu screens). Configuration is complete. Go to page 16.

STEP 2: DIRECTV ANTENNA CONFIGURATION

The VuQube is factory pre-set for the DIRECTV 101 satellite. Unless the antenna has been

configured for another option since leaving the factory, PERFORM STEP 5 ONLY.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Žádné komentáře

VuQube VQ2000 Provozní pokyny Strana 10